Clark - C20 Specifications - Forkliftaction.com

SPEC-CHECKER : Product specifications

Clark Model: C20 Draft specifications (awaiting approval)
Market World
Equipment Type Forklift - Conventional (I.C.E.)
Description LPG or Diesel powered, 2000kg capacity. Standard and triple-stage masts available. LPG standard model shown.
Tip! Position your mouse over specification name for description.

Tools: Roll over icons for explanation

General information

Fuel type	LP gas / natural gas
Mast type (standard)	2 stage / 3 stage
Capacity A	2000 kg (4,409.25 lb)
@ Load centre A	500 mm (19.69 in)

Performance specifications

Drawbar pull (max.)	18.35 kN (kilonewton) (4,125.24 lbf)
Lift speed, with load	540 mm / sec. (21.26 in/sec)
Lift speed, no load	630 mm / sec. (24.80 in/sec)
Travel speed forward, with load	20.1 kph (12.49 mph)
Travel speed forward, no load	20.1 kph (12.49 mph)
Climbing performance, with load (%)	32.6

Power specifications

Engine, make	Mitsubishi
Engine, model	4G64
Rated power	35.4 KW
@ rpm	2250
Transmission, type	Powershift
Gears forward	1
Gears reverse	1

Dimensions and weight

Max. lift height	4318 mm (170.00 in)
Free lift	1511 mm (59.49 in)
Lowered height	2165 mm (85.24 in)
Machine length	2496 mm (98.27 in)
Machine width	1255 mm (49.41 in)
Machine wheel base	1620 mm (63.78 in)
Outside turning radius	2245 mm (88.39 in)
Right angle stacking aisle	2700 mm (106.30 in)
Machine weight (no load)	3669 kg (8,088.76 lb)

Wheels, tyres and brakes

Wheel number	4
Wheels driven	2
Tyres, type	Pneumatic
Tyre size, front	7x12-14PR
Tyre size, rear	6x9-10PR
Brakes, type (service)	Drum

Source:http://www.clarkmhc.com/Spec_Sheets/C2030_598940326.pdf
Last updated: Thursday, 23 February 2006

Disclaimer:
The information in our catalogue is compiled from specifications supplied by equipment manufacturers. Details are frequently input directly by manufacturers. We advise you to contact manufacturers' agents to check that specifications are current. Forkliftaction.com accepts no responsibility for errors or omissions.