Kaup
|
|
|
|
T129 Load Stabilizer Kaup
Attachments - Forklift and crane
-
World
A hydraulically adjustable contact pad frame which lowers onto the load in order to hold it in position during transport. Rubber tubes are bolted to the contact pad frame to prevent the load from being squashed. Frame size can be adapted to the load size. Often sold in combination with Sideshifters, Multi Sideshifters or Multi Pallet Handlers. If the top surface of the load has protruding parts e.g. bottle necks, a flat plate with soft rubber lining is recommended.
|
|
|
|
|
|
|
T140E Reach Fork Kaup
Attachments - Forklift and crane
-
World
T140E Reach Forks allow loading pallets to lorry platforms or railway wagons from the side. The pallet can be carried to the opposite side of the loading platform. Single Reach Forks are often combined with a Fork Positioner (KAUP range T163, T466 or T411Z) in order to reach the distance between the reach forks. (Also see Telescopic Forks, Pantograph).
Options: sideshift.
|
|
|
|
|
|
|
T145 SA Push-Pull Kaup
Attachments - Forklift and crane
-
World
T145 SA Push-Pull with Slip-On-Fork Version and Sheet Saver
Used for loading / unloading goods in containers on space-saving slip-sheets (cardboard or heavy duty plastic). Slip-sheet and load are pulled onto the fixed carrying plates by a front gripper bar mechanism and then pushed off again.
|
|
|
|
|
|
|
T146 S Push-Pull Kaup
Attachments - Forklift and crane
-
World
T146 S Push-Pull with Sideshift and Sheet Saver
Used for loading / unloading goods in containers on space-saving slip-sheets (cardboard or heavy duty plastic). Slip-sheet and load are pulled onto the fixed carrying plates by a front gripper bar mechanism and then pushed off again.
|
|
|
|
|
|
|
T149 Pantograph Kaup
Attachments - Forklift and crane
-
World
The Pantograph is a reach attachment for carrying additional attachments such as Bale Clamps or Multi Pallet Handlers or forks with very thin blades for loading and unloading trucks or railway wagons from one side or for double deep stacking.
Options: lateral supporting plates
|
|
|
|
|
|
|
T151 I Sideshifter Integrated Kaup
Attachments - Forklift and crane
-
World
Sideshifter – Integrated T 151 I
Integrated into the mast allows nearly complete nominal capacity on the FLT. KAUP integrated sideshifters feature SMOOTHROLL (needle bearing rollers) and QUICK SEAL (see Quickseal).
Options: special version for Reach Trucks.
|
|
|
|
|
|
|
T151 P2 Sideshifter Kaup
Attachments - Forklift and crane
-
World
T 151 P 2 Sideshifter (High performance model)
The P 2 Sideshifter offers quick and simple mounting, SOFTSTOP end of stroke slow down, small lost load, equal shifting force and speed on both sides, shielded piston rods, SMOOTHROLL needle bearing rollers and load centres, respectively a fork length unrestricted within maximum capacity of truck.
Options: special version for Reach Trucks, explosion proof version.
|
|
|
|
|
|
|
T151 P4 Sideshifter Kaup
Attachments - Forklift and crane
-
World
Standard T 151 P4 Sideshifter
With unbeatable visibility - no sideshifter on the market offers better driver visibility, quick, easy mounting, simple replacement of spare parts and an unbeatable residual capacity (see QUICK SEAL).
|
|
|
|
|
|
|
T160 Fork Positioner Kaup
Attachments - Forklift and crane
-
World
Very economical Fork Positioner which allows the forklift truck driver excellent view on to the tips of the forks and the load. All attachments in this range are fitted with valve block sideshift as standard.
Options: integrated, with or without forks
|
|
|
|
|
|
|
T163SN Fork Positioner Kaup
Attachments - Forklift and crane
-
World
Fork Positioner Type T 163 SN (light duty)
Inexpensive, simple fork positioner with absolutely symmetrical fork adjustment via mechanical
synchronism over a roller chain. The original forklift truck forks can be used. The construction width and therefore the opening range of the attachment is not dependent on the width of the fork carriage of the forklift truck. Taking up loads between the forks or pushing with the forks is not permitted. When the fork length exceeds 1.600 mm forks should feature 150 mm wide upper hooks.
Options: without sideshift, with load backrest, quick release bottom hooks.
|
|
|
|
|
|
|
T179 Load Backrest Kaup
Attachments - Forklift and crane
-
World
Load Backrests are fitted onto the top of different attachments in order to protect the load from slipping backwards onto the mast and to support the load.
|
|
|
|
|
|
|
T183CTH Crane Jib Hydraulic Kaup
Attachments - Forklift and crane
-
World
Usually used where goods are generally picked up from above e.g. used in motor car works, for fitting or removing motors, in metal works to place or remove the press tooling and in concrete works for the transportation of finished units. Crane jibs can be fitted with adapted grabs or tongs, with either manual, mechanical, pneumatic or hydraulic control, designed to pick up timber, steel tubes, brick or slate piles and a variety of other materials. Capacity, height of jib and reach are variable and selected according to the specific handling task. If used for transport, swinging loads considerably reduces FLT’s residual capacity!
Options: additional hooks.
|
|
|
|
|
|
|
T183CTM Crane Jib Mechanical Kaup
Attachments - Forklift and crane
-
World
Usually used where goods are generally picked up from above e.g. used in motor car works, for fitting or removing motors, in metal works to place or remove the press tooling and in concrete works for the transportation of finished units. Crane jibs can be fitted with adapted grabs or tongs, with either manual, mechanical, pneumatic or hydraulic control, designed to pick up timber, steel tubes, brick or slate piles and a variety of other materials. Capacity, height of jib and reach are variable and selected according to the specific handling task. If used for transport, swinging loads considerably reduces FLT’s residual capacity!
Options: additional hooks.
|
|
|
|
|
|
|
T183GS Crane Jib slip-on fork Kaup
Attachments - Forklift and crane
-
World
Slip-on fork pockets carry the Crane Jib’s outrigger between the forks and extends beyond the length of the forks.
|
|
|
|
|
|
|
T184 Loading Bucket Kaup
Attachments - Forklift and crane
-
World
Loose goods such as sand, gravel, coal, grain, fertilizer, clay, cement etc. can be transported with the loading bucket. The bucket is tilted forward to the ground by means of one hydraulic cylinder in the basic version, two hydraulic cylinders in the standard version. It is recommended that the bucket is at least 100 mm wider than the truck so that the tyres of the truck do not touch the goods to be transported.
Options: special designs with additional gripper (downhold function) used for recycling applications.
|
|
|
|
|
|
|
T185 Carrying Ram Kaup
Attachments - Forklift and crane
-
World
Carrying Rams are used on forklift trucks to simplify the handling of concrete pipes, coils of steel and aluminium wire and sheet or other materials wound on cores. They are mechanical FLT attachments, i.e. they do not require supplementary energy. Rams can be coated with polyurethane in order to protect the load from scratches or marks. The diameter of the tube is selected according to capacity and diameter of the core. Tubular rams are available with lifting capacities of up to 80 tons. Sideshift function on the FLT is recommended.
Options: quick release bottom hooks, double booms, double booms with adjustable distance, e.g. on Fork Positioners.
|
|
|
|
|
|
|
T185T Carpet Carrying Ram Kaup
Attachments - Forklift and crane
-
World
Long, thin and up to 5 metres long carrying ram for transporting carpet or material which has been rolled on to a cardboard core tube. Tip of the ram is sloped and smooth for easy entering into the cardboard core tube. The length of the ram should be at least 2/3 of the length of the carpet. Sideshift function on the FLT is recommended for easy entering.
Options: quick release bottom hooks, double booms, double booms with adjustable distance.
|
|
|
|
|
|
|
T191KND Spreader Kaup
Attachments - Forklift and crane
-
World
KAUP Spreaders are usually designed to meet the special requirements of each individual customer. Whether for operation on a forklift truck, on a gantry crane in harbours or on board container ships KAUP has a wide spectrum of Spreaders on offer. Fixed-frame Spreaders are non-telescopic spreaders which handle all standard sizes of containers by mobile harbour crane. Fixed-frame Spreaders are standardly equipped with level compensation and 6 flippers. Telescopic Spreaders telescope to adapt from 20’ up to 48’ containers. Starting from the 20’ position every required telescopic extension is controlled precisely by cylinder stops. Difference in width between ISO and Sealand containers is accommodated by telescopic end beams. During pick up the container is secured by 4 corner flippers (mobile harbour crane container spreaders have 6 flippers) which fasten on to the lifting hooks. As the container is lifted a sturdy sensing pin engages in a locking disk to prevent the spreader from unlocking, whether intentionally or unintentionally. Four proximity switches on the sensing pins signal the operator when the spreader is properly seated on the container. When a hydraulic telescopic spreader is not necessarily economical i.e. when containers account for a relatively small proportion of the cargo handling workload a Manual Telescopic Spreader can be used. Telescoping to the required container length is achieved manually with a rack and pinion mechanism. The twistlocks are manually locked pair wise with mechanical linkage.
Options: telescope, rotation, level compensation, slewing gear, emergency lifting hooks
|
|
|
|
|
|
|
T198G1 Snow Plough Blade Kaup
Attachments - Forklift and crane
-
World
Snow Plough Blade.
Used for clearing streets and footpaths of snow it is designed to slip on the forks of the FLT. The blade can be mechanically or hydraulically turned 30° for clearing on the left or right side. Polyurethane flaps at the bottom allow passing over curb stoned fringes of pavements.
Options: slip on fork version, carriage mounted or hydraulically powered.
|
|
|
|
|
|
|
T252 Double Sideshifter Kaup
Attachments - Forklift and crane
-
World
Multiple Sideshifting Devices
A common method of achieving higher efficiency of forklift trucks is to transport a multiple number of pallets or unit loads on one run. Multiple Sideshifters are capable of handling two, three or four pallets at once, often double deep (i.e. up to 8 pallets) and are often encountered in brickworks. KAUP Multi Sideshifters have a basic sideshift, where the whole load can be shifted left and right. The two, three or four additional fork carriages are either simultaneously or individually, hydraulically adjustable. Consequently this allows changing of the distance between the pallets and moving together or apart of the units. The Multiple Sideshifter should only be applied where always the exact number of transport units will be picked up otherwise the load would be off centre. Adjustment: either individual movement via solenoid valves or simultaneous movement of the front carriages via Flow Dividers.
Options: Load Backrests for the front fork carriages, quick release bottom hooks. Quadruple Sideshifting Device for 8 pallets.
|
|
|
|
|
|
|
T253 Triple Sideshifter Kaup
Attachments - Forklift and crane
-
World
T253 Triple Sideshifter
Multiple Sideshifting Devices
A common method of achieving higher efficiency of forklift trucks is to transport a multiple number of pallets or unit loads on one run. Multiple Sideshifters are capable of handling two, three or four pallets at once, often double deep (i.e. up to 8 pallets) and are often encountered in brickworks. KAUP Multi Sideshifters have a basic sideshift, where the whole load can be shifted left and right. The two, three or four additional fork carriages are either simultaneously or individually, hydraulically adjustable. Consequently this allows changing of the distance between the pallets and moving together or apart of the units. The Multiple Sideshifter should only be applied where always the exact number of transport units will be picked up otherwise the load would be off centre. Adjustment: either individual movement via solenoid valves or simultaneous movement of the front carriages via Flow Dividers.
Options: Load Backrests for the front fork carriages, quick release bottom hooks. Quadruple Sideshifting Device for 8 pallets.
|
|
|
|
|
|
|
T253-3 Triple Sideshifter Kaup
Attachments - Forklift and crane
-
World
T253-3 Triple Sideshifter with 3 sideshifting carriages
Multiple Sideshifting Devices
A common method of achieving higher efficiency of forklift trucks is to transport a multiple number of pallets or unit loads on one run. Multiple Sideshifters are capable of handling two, three or four pallets at once, often double deep (i.e. up to 8 pallets) and are often encountered in brickworks. KAUP Multi Sideshifters have a basic sideshift, where the whole load can be shifted left and right. The two, three or four additional fork carriages are either simultaneously or individually, hydraulically adjustable. Consequently this allows changing of the distance between the pallets and moving together or apart of the units. The Multiple Sideshifter should only be applied where always the exact number of transport units will be picked up otherwise the load would be off centre. Adjustment: either individual movement via solenoid valves or simultaneous movement of the front carriages via Flow Dividers.
Options: Load Backrests for the front fork carriages, quick release bottom hooks. Quadruple Sideshifting Device for 8 pallets.
|
|
|
|
|
|
|
T351 Rotator Kaup
Attachments - Forklift and crane
-
World
The basic version of the KAUP Rotator is equipped with a fork carriage and use the original FLT forks. It can rotate endless (360°). Containers with slip-in pockets can be turned for emptying. Original truck forks with normal width can be fixed by means of square stops, included in the delivery, which are bolted onto the lower carriage bar. Bolt holes in the stops offset to all four sides for safe fixing. This is the range of the highest load strain during rotation. The Reduction Gear is placed offset to the right for better driver visibility. A large centre window allows good visibility through the attachment.
Options: sideshift function, lateral supporting arm, down hold, Explosion Proof, Foundry, or Fishing Industry versions (see Fishing Rotator / Foundry Rotator).
|
|
|
|
|
|
|
T360 Ladle Tippler Kaup
Attachments - Forklift and crane
-
World
Usually found in foundries this attachment is used for the transport and pouring of liquid metals with
the help of a ladle. The ladle has slip in pockets for the forks of the ladle tippler. The rotating point lies as close as possible to the pouring tip of the ladle for a low relative movement.
Options: sideshift / increased sideshift (for narrow aisles), 2 tilting directions available. If front and side tilt required see Trilateral Head.
|
|
|
|
|
|
|
T406-2H Drum Tilting Clamp Kaup
Attachments - Forklift and crane
-
World
The Drum Tilting Clamp can tilt drums (with special clamping arms also other containers or rolls) or turn drums over to the front for emptying. The tilting function is carried out by 1 cylinder (on 1 arm) or 2 cylinders (on both arms). Drums lying in a horizontal position can be picked up and stood upright. Drum Tippling arms are also available as slip on version for the KAUP Fork Clamp.
Options: independent sideshift function, load backrest, quick release bottom hooks, explosion proof
version, special design for plastic drums.
|
|
|
|
|
|
|
T411 Fork Positioner Kaup
Attachments - Forklift and crane
-
World
Fork Positioner Type T 411 Z (heavy duty)
Fork Positioners for extremely tough operation, based on the T 400 Clamp range. The forks can be
opened wider then the construction width of the clamp body. Due to the large profile covering between fork guide and clamp body, spreading forces e.g. for the transportation of coils or cable drums, can easily be done. Independent sideshift enables the load to be handled with the forks fully opened or closed together. Featuring separate sideshift. The BZI version is integrated into the mast of the truck to achieve better residual capacities.
Options: cylinder and piston rod protection, valve block sideshift (no sideshift possible when the forks are fully opened or closed).
|
|
|
|
|
|
|
T411AH Clamp Harbor Kaup
Attachments - Forklift and crane
-
World
Special form of Fork Clamp, comes with independent sideshift function and sideshift cylinder protection. The carrying part of the fork, in addition to the normal tapering to about 2/3 of the fork length, is also tapered in the fork width. This makes it possible to pick up bales stored tightly next to each other e.g. in a container or slip under non palletized goods. The Harbour Clamp is standardly equipped with protection of cylinders and sideshifter due to rough working conditions.
Options: load backrest, without sideshift
|
|
|
|
|
|
|
T411D Clamp with Turnable Fork Kaup
Attachments - Forklift and crane
-
World
Fork Clamp with Turnable Forks.
On the Fork Clamp with Turnable Forks, the carrying part of the forks is turnable by +/- 90°. Therefore this clamp is suitable for fork operation (transport of palletised goods, crate boxes etc.) as well as for clamping bales, boxes and cartons. If the turnable forks are turned only 45° a prism is formed which allows easy transportation of drums or other cylindrical objects. This makes the Fork Clamp with Turnable Forks a very versatile attachment. The turnable forks can be turned manually (standard) and as an option hydraulically (additional hydraulic circuit via solenoid valve required). The clamp comes with independent sideshift function and take ups for Load Backrests.
Options: Load Backrest, quick release bottom hooks, drill holes for bolt on arms, cylinder and/or piston rod protection.
|
|
|
|
|
|
|
T412H Block & Brick Clamp Kaup
Attachments - Forklift and crane
-
World
Leading manufacturers prefer the version with hydraulic compensation where the arms of the clamps are hollow and filled with grease. Small pistons are situated in these grease filled chambers. The contact pads simply adjust to the geometrical form of the material to be transported and are easily exchangeable. These buffer linings are available in round shape, square shaped, as steel parts with rubber or polyurethane surface.
Options: quick release bottom hooks, load backrest, centre bumper plate, cylinder and/or piston rod protection.
|
|
|
|
|
|
|
T412HP Block Clamp Kaup
Attachments - Forklift and crane
-
World
Similar to T 412 H. Each arm is double high. 3 single pistons are covered with 1 contact pad. These are usually covered with polyurethane or have a corrugated plate. The big plates reduce the pressure per cm² and allows handling of green blocks.
|
|
|
|
|
|
|
T412V Block Clamp Kaup
Attachments - Forklift and crane
-
World
Grips the packets of blocks / bricks from the side. Clamp features independent sideshift and take ups for load backrest. The clamping arms of this version are designed with an easily exchangeable polyurethane wear and tear lining in order to increase grip between the clamping arms and the load as well as to prevent pressure marks on bricks which are not completely dry.
Options: quick release bottom hooks, load backrest, centre bumper plate, cylinder and/or piston rod protection.
|
|
|
|
|
|
|
T413 Bale Clamp Kaup
Attachments - Forklift and crane
-
World
Bale Clamps allow palletless transportation of bales of material such as fabric, recycled & waste paper or bales of tobacco. Clamp features independent sideshift function and take ups for load backrest. The inner side of the clamping arms are designed to meet the exact transportation requirements i.e. arms faced with cleated strip to grip pressure-sensitive cartons, with corrugated bars to handle waste paper or with steel rods welded onto arms for transporting bales of cloth, finally with spikes for anodes. As a rule both arms of the Bale Clamp are rigid and of a bend design welded to the
sliding profiles which prevents breaking of the arms or cracking bolt nuts, whereas the clamping arms of the so called Recycling Bale Clamp are reinforced for tip clamping. Fixed arms are designed with toe-in (approx. 30 mm for each 1000 mm of arm length) i.e. the distance between the tips of the arms is approx. 30 mm less than at the arm connection. Bale Clamps can also be mounted onto wheel loaders or reach trucks. Arm tips are sloped and the outside is smooth for easy entering between bale stacks. KAUP Bale Clamps feature a double acting pressure regulation valve which prevents any damages when pushing bales away when opening the arms.
Options: wear and tear bar on bottom of arm, cylinder protection, piston rod protection, rubber lining, coatings such as secutex or polyurethane, quick release bottom hooks or quick release system for wheel loaders.
|
|
|
|
|
|
|
T413B-1 Pulp Bale Clamp Kaup
Attachments - Forklift and crane
-
World
Bale Clamps allow palletless transportation of bales of material such as fabric, recycled & waste paper or bales of tobacco. Clamp features independent sideshift function and take ups for load backrest. The inner side of the clamping arms are designed to meet the exact transportation requirements i.e. arms faced with cleated strip to grip pressure-sensitive cartons, with corrugated bars to handle waste paper or with steel rods welded onto arms for transporting bales of cloth, finally with spikes for anodes. As a rule both arms of the Bale Clamp are rigid and of a bend design welded to the
sliding profiles which prevents breaking of the arms or cracking bolt nuts, whereas the clamping arms of the so called Recycling Bale Clamp are reinforced for tip clamping. Fixed arms are designed with toe-in (approx. 30 mm for each 1000 mm of arm length) i.e. the distance between the tips of the arms is approx. 30 mm less than at the arm connection. Bale Clamps can also be mounted onto wheel loaders or reach trucks. Arm tips are sloped and the outside is smooth for easy entering between bale stacks. KAUP Bale Clamps feature a double acting pressure regulation valve which prevents any damages when pushing bales away when opening the arms.
Options: wear and tear bar on bottom of arm, cylinder protection, piston rod protection, rubber lining, coatings such as secutex or polyurethane, quick release bottom hooks or quick release system for wheel loaders
|
|
|
|
|
|
|
T413G Appliance Clamp Kaup
Attachments - Forklift and crane
-
World
Appliance Clamps and Large Surface Clamps (Carton Clamps) are mainly used for so called white (electrical household appliances such as refrigerators, washing machines etc.) or brown goods (television sets and home entertainment appliances). The large clamping arms are fitted to match the measurements of the goods so that they are transported safely & without damaging them. Clamp features independent sideshift function and take ups for load backrest and manometer gauge. Also available with sensors and with automatic clamping force adjustment of the required pressure, specially designed for the transportation of a different number of units (also see Large Surface Clamps and Appliance Clamps - telescopic).
Options: coatings such as secutex, polyurethane etc., turnable rubber lining, quick release bottom hooks, load backrest, centre bumper plate, flow divider, adjustable toe in and light control / indication as well as screw on rubber, tear and wear bar on the bottom of the arm.
|
|
|
|
|
|
|
T413GT Telescopic Appliance Kaup
Attachments - Forklift and crane
-
World
This attachment is used when a combination of a narrow frame width & large opening range is required. The basic body of KAUP Telescopic High-Visibility Clamps is almost identical with the standard clamps. The front clamp sections fitted on the T-beams of the body differ by being of double-C rather than single-C shape. Telescopic section T-beams welded to the clamp arms locate in the front channel of the double-C section. Each telescopic section is operated by a separate cylinder giving a total of four clamp cylinders. Back-to-back arrangement of the telescopic sections results in higher lost load compared to the standard clamps but visibility is not restricted.
|
|
|
|
|
|
|
T413RC Recycling Bale Clamp Kaup
Attachments - Forklift and crane
-
World
Bale Clamps allow palletless transportation of bales of material such as fabric, recycled & waste paper or bales of tobacco. Clamp features independent sideshift function and take ups for load backrest. The inner side of the clamping arms are designed to meet the exact transportation requirements i.e. arms faced with cleated strip to grip pressure-sensitive cartons, with corrugated bars to handle waste paper or with steel rods welded onto arms for transporting bales of cloth, finally with spikes for anodes. As a rule both arms of the Bale Clamp are rigid and of a bend design welded to the
sliding profiles which prevents breaking of the arms or cracking bolt nuts, whereas the clamping arms of the so called Recycling Bale Clamp are reinforced for tip clamping. Fixed arms are designed with toe-in (approx. 30 mm for each 1000 mm of arm length) i.e. the distance between the tips of the arms is approx. 30 mm less than at the arm connection. Bale Clamps can also be mounted onto wheel loaders or reach trucks. Arm tips are sloped and the outside is smooth for easy entering between bale stacks. KAUP Bale Clamps feature a double acting pressure regulation valve which prevents any damages when pushing bales away when opening the arms.
Options: wear and tear bar on bottom of arm, cylinder protection, piston rod protection, rubber lining, coatings such as secutex or polyurethane, quick release bottom hooks or quick release system for wheel loaders
|
|
|
|
|
|
|
T414-1L Appliance Clamp Kaup
Attachments - Forklift and crane
-
World
Clamps used to transport so called “white or brown goods” i.e. household appliances such as refrigerators, washing machines or television sets and home entertainment appliances. The large clamping arms are suitable to fit different loads and different combinations of loads. Also available with sensors for automatic pressure control of the arms. The clamp features independent sideshift function and take ups for load backrest. Arms are selected according to the load size. Large Surface Clamping Arms have a single or double pivoting point to distribute the pressure equally over the whole surface.
Options: quick release bottom hooks, Load Backrest, centre bumper plate, Secutex lining, turnable
rubber pads, adjustable toe-in, adjustable arm inclination and indicator for preselected pressure range (traffic light design). Also available with 1 swivel arm and one fixed arm (see Appliance Clamps).
|
|
|
|
|
|
|
T421SV Tyre Handler Kaup
Attachments - Forklift and crane
-
World
Tyre Handler (Tyre Handling and Mounting Device).
KAUP has developed a combination unit of fork clamp, sideshifter and specialized clamping arms for handling and mounting large diameter vehicle wheels weighting up to 6 tons. The horizontal tyres are picked up by means of prism shaped arms and brought into the vertical position (90° tilt) by use of hydraulic cylinders. Sideshift function and the rotating range of +/- 20° enables the tyre to be positioned correctly over the bolt corona of the wheels.
|
|
|
|
|
|
|
T429 Double Pallet Handler Kaup
Attachments - Forklift and crane
-
World
Double Pallet Handler T 429
The T 429 was introduced in September 2003. It has a function similar to T 409. Available with both screw on forks or with telescopic forks for beverage and Euro pallets handling (telescoping range 800 – 1200 mm or even longer). Due to arranging the profiles in front of each other excellent visibility is ensured. With screw on forks all 4 forks are identical. Inner fork is positioned 5 mm lower to the outer ones to create an angle to the centre. Therefore the inner forks wear off first. Inner and outer forks can be inter changed.
|
|
|
|
|
|
|
T429 1-2-3 Triple Pallet Kaup
Attachments - Forklift and crane
-
World
The Triple Pallet Handler T 429 has sideshift and is suitable for picking up 1, 2 or 3 pallets side by side.
Options: Single adjustment of single fork pairs possible.
|
|
|
|
|
|
|
T445F Mini Drum Clamp Kaup
Attachments - Forklift and crane
-
World
T445F Mini Drum Clamp
Quick easy mounting of the Mini Drum Clamp onto the forklift truck is the trade mark of this attachment. It is simply slipped on the forks, tightened, connected hydraulically to the truck and is instantly operational. As it is easy to mount it is usually used when drums or garbage bins are only occasionally transported and rotated laterally by 180° to empty them. The clamping arms are standardly designed to fit cylindrical drums or garbage bins with up to 240 l capacity.
Options: Explosion Proof version with ATEX certification. Also available as Mini Drum Tippling Clamp and without rotation.
|
|
|
|
|
|
|
T451W Pallet Turnover Clamp Kaup
Attachments - Forklift and crane
-
World
Pallet Turnover Clamps are put in operation where the production requires that the load is to be turned 180° (i.e. for exchanging from production pallets to transport pallets in brick works where the bricks are turned ready for the building site). The clamp is also suitable for the emptying of containers. Design consists of a clamp with one pair of forks on each arm and a rotator on the back.
Options: sideshift functions, quick release bottom hooks, fold down forks, additional pair of forks in the centre of the clamp, mechanical or manual adjustment of distance between forks, slip-on arms, adjustable side arm (manual or hydraulic), multi tine version or explosion proof version. Also available as Stationary Inverter with own power unit.
|
|
|
|
|
|
|
T451WA Turnover Clamp Pusher Kaup
Attachments - Forklift and crane
-
World
De-palletising of bagged goods is the typical application of this attachments. Pallet Turnover Clamps with Pusher are put into operation when loads have to be transferred from a high-grade production pallet to a cheaper transport pallet (one way pallet) or slip sheet, directly loaded onto lorries or railway wagons. The palletized goods are picked up with the forks, clamped and turned 180°. When the clamp opens the load lies on the carrying plate(s) and is hydraulically pushed off, with the help of the pushing grate, onto the transport pallet or directly on to the lorry platform or railway wagon. All dimensions and parameters of this attachment have to be selected carefully according to load.
Options: Lateral supporting plates in fixed, mechanically adjustable or hydraulically adjustable versions, sideshift function, quick release bottom hooks. Multi tines instead of carrying plates possible.
|
|
|
|
|
|
|
T453 Rotating Bale Clamp Kaup
Attachments - Forklift and crane
-
World
Bale clamp as above mounted on a rotating head in order to turn bales, empty boxes, box pallets or containers (also see Rotating Fork Clamp). Attachment with sideshift requires a solenoid valve as 3 hydraulic functions are required (rotating, clamping & sideshift).
|
|
|
|
|
|
|
T458 Rotating Roll Clamp Kaup
Attachments - Forklift and crane
-
World
Rotating Roll Clamp – swinging arm type- continuous long arm – movable short arm.
Usually in the swinging arm type the long and short arm are hydraulically movable – the long arm to grab the roll, the short arm in order to adjust it to other (smaller) roll diameters. (Only moveable when the rotator is brought to the 45° position
|
|
|
|
|
|
|
T458C-2 Rotating Roll Clamp Kaup
Attachments - Forklift and crane
-
World
Rotating Roll Clamp – swinging arm type - split contact pads on long arm.
All rotating roll clamps of swinging arm type can be equipped with a split long arm. -2 indicates that the long arm is split. This means it can adjust itself if you take up two rolls with different diameters at the same time. Each of the long split arms has a cylinder inside, which allow the rolls of different diameters to be clamped individually and safely.
|
|
|
|
|
|
|
T458P Rotating Roll Clamp Kaup
Attachments - Forklift and crane
-
World
P indicates parallel guided clamp (has a clamp body with T and C profiles like any other lateral clamp). The parallel guided Rotating Roll Clamp could be considered the mother of roll clamps. It is just a combination of a rotator and a lateral roll clamp. Generally it is considered old fashioned because the clamp body is usually wider than the rotator and therefore could hit rolls aside or other obstacles, performs difficultly in small areas, such as containers and features a higher weight compared to the up to date swinging arm type clamps. Its existence is still justified because the efficiency of bringing cylinder force to the loads is optimal and the slender straight arms allow entry to closely stacked rolls and chimney stacked rolls. This design would also be used for very high load weights such as big coils, pipelines or cement tubes.
|
|
|
|
|
|
|
T466 Fork Positioner Kaup
Attachments - Forklift and crane
-
World
Fork Positioner Type T 466 (medium duty)
Extremely variable concept with a total of four different versions. Main difference to carriage guided systems: no wear on fork hooks (claws) I.e. reduced costs.
T 466 - hook on design allowing the use of the original truck forks ->flexibility on using own forks
T 466 Z - hook on design with forks welded on -> no rattle, better lost load, better residual capacity
T 466 I - integrated design allowing the use of the original truck forks ->flexibility on using own forks
T 466 IZ - integrated design with forks welded on -> no rattle, better lost load, best residual capacity
All equipped with independent sideshift function and take ups for Load Backrest.
Options: without sideshift, with quick release bottom hooks.
|
|
|
|
|
You
are viewing a Forkliftaction.com shopfront
Contact Info
Send
Email
Visit
Website
Print
